MAN TGE

New MAN TGE Engine

Genuine new 2.0 TDI (VW EA288) engines for all power versions of the MAN TGE - from the 102 hp base model to the 177 hp Bi-Turbo.
Full 12-month warranty, EU-wide delivery within 5 working days and a price by VIN and engine code within 1 hour.

Get a price
MAN TGE

VW drivetrain, MAN badge, premium-level quality

The MAN TGE is the result of a joint venture between MAN Truck & Bus and Volkswagen - since 2017 it has shared its platform, chassis and engines with the second-generation VW Crafter. The customer gets the familiar MAN service network and ruggedness, while under the bonnet sits the proven VW 2.0 TDI engine of the EA288 family.

We supply brand-new engines direct from the original manufacturer - not reman, not „as-new“. Every unit comes with full service documentation, compatibility verified by VIN, and we deliver it across the EU within 5 working days.

Get a price for my TGE
MAN TGE - van with new 2.0 TDI EA288 engine
Engines by power output

Which MAN TGE engines we supply

The MAN TGE uses exclusively the 2.0-litre 4-cylinder VW EA288 - from the base single-turbo 102 hp to the 177 hp Bi-Turbo for demanding duty and the heavy 5-tonne variants.

2.0 TDI

MAN TGE 2.0 TDI - Single Turbo

Displacement
1 968 cm³
Power
75 - 103 kW (102 - 140 hp)
Years built
2017 - present
Variants
Euro 6 - Euro 6d
Engine codes by power output
  • 102 hp DAUA, DAVA
  • 122 hp DAUB, DAVB, DAWB
  • 140 hp DAUC, DAUE, DAVD, DAVE, DAWA
  • Euro 6d DLAA, DLAB

The base and mid-range power line for the majority of the MAN TGE - covering variants from 3.0 to 4.0 tonnes. Bosch common rail with a toothed timing belt and an AdBlue SCR system. Thanks to platform sharing with the VW Crafter, peripheral parts and diagnostics are widely available.

Price for the 2.0 TDI engine
Bi-Turbo

MAN TGE 2.0 TDI Bi-Turbo

Displacement
1 968 cm³
Power
130 kW (177 hp)
Years built
2017 - present
Variants
Euro 6 - Euro 6d
Engine codes by generation
  • 177 hp Bi-T. DAUF, DAVF, DAVG, DAWF
  • Euro 6d Bi-T. DLAB

The top-spec version with twin turbos (sequential turbos with a low- and high-pressure stage). Intended for the MAN TGE 5.0 t (TGE 5.180), higher-payload variants or duty with a trailer. Higher torque across a wider rev band.

Price for the Bi-Turbo engine

Could not find your engine code here, or unsure which engine your vehicle has?

Send us the VIN - we will read out the exact engine code, generation and all technical parameters. You will have the price and availability in your inbox within a few hours.

Get a price by VIN
Parts

Parts for the MAN TGE

In addition to whole engines we supply all key components for the 2.0 TDI EA288 - so you avoid sourcing parts from five different suppliers and losing days waiting for „the last one“.

Single / Bi-Turbo

Garrett VNT turbo for the 102 - 140 hp versions, sequential Bi-Turbo (Garrett + IHI) for the 177 hp variant. Including actuators and gaskets.

Bosch injectors

Bosch CRI3 common-rail injectors for the EA288. Supplied with coding data for IMA programming into the ECU.

High-pressure pump

Bosch CP4.1 high-pressure pump for the EA288. Prone to failure on contaminated fuel - we recommend replacing it together with the filtration.

Timing

The EA288 uses a toothed timing belt. Kits including tensioners, idler pulleys and seals.

Cylinder head

Fully assembled 2.0 TDI heads including valves, guides and gaskets. A solution for engine overheating or a cracked original head.

Clutch and flywheel

Dual-mass flywheels and clutch kits for both manual and automatic (8AT for Bi-Turbo). Genuine Sachs / LuK.

Choose the scope, we cover the rest

Three options for three scenarios - from a complete swap to an economical solution for workshops with their own parts.

Detailed comparison of engine types
New short block No accessories

New short block

Lower upfront price and the option to fit your existing accessories.

  • Engine block
  • Crankshaft
  • Crankshaft bearings
  • Connecting rod set
  • Pistons
from 2 290 €
Get a price
Most popular
New long block Best price-to-value ratio

New long block

The most frequently bought option. The engine core including the cylinder head.

  • Everything from the short block
  • Cylinder head, head gasket
  • Valves, valve cover
  • Camshafts
  • Oil sump
from 3 990 €
Get a price
New complete engine Ready to install

New complete engine

A fully dressed engine. Built on the long block and includes all accessories.

  • Everything from the long block
  • Wiring loom and sensors
  • Injection system, intake, turbo
  • Alternator, starter, A/C compressor
  • Timing, exhaust, pumps, flywheel
from 8 100 €
Get a price
Why new

A reman for the TGE usually does not pay off

The MAN TGE is among the newer models, mostly running fleet duty. On a van that exceeds 40,000 km a year, a remanufactured engine is a gamble - especially the 2.0 TDI EA288, which is sensitive to component quality in the fuel system. The second repair usually arrives within six months.

A new engine has a clear 0 km, full warranty and no doubts. Under intensive use it works out cheaper in the long run - the TGE sits at the workshop once, not four times.

Reman vs. new - full comparison

  • 12-month warranty

    Full manufacturer warranty - no exceptions, no curtailment for normal wear and tear.

  • Delivery within 5 days

    Standard for both 2.0 TDI and Bi-Turbo versions. Special codes within 7 - 10 days.

  • Free VIN check

    Before ordering we verify the exact engine code so it fits your TGE.

Quote

We send the price within 1 hour

Enter the VIN and engine code. The rest is on us - we verify the match, calculate the price and reply with a specific quote.

  • No commitment, no registration
  • Reply within 1 hour during business hours
  • Free VIN check
Phone+421 948 504 044
Emailinfo@torkemotor.eu

Your details

So we can reach you with the quote.

Your vehicle

The more accurate the data, the more accurate the price.

With the engine code filled in correctly, we send the quote within 1 hour.
Usually on a sticker or stamped on the engine block, in some countries also in the registration document - e.g. F1AGL4113. The VIN is also enough for the quote.

Engine type

If you are not sure, we will send the quote for all three.

I am also interested in parts

Tick the parts you are interested in. We will send the prices together with the engine quote.

Upload registration document (optional)
Drag files here or click to choose
Allowed: PDF, PNG, JPG · max 10 MB total

By submitting the form you agree to the processing of personal data for the purpose of issuing a quote in accordance with the GDPR.