Fiat Ducato

New Fiat Ducato Engine

Genuine new 2.3 Multijet (F1A), 3.0 Multijet (F1C) and 2.2 HDi (DW12) engines for all generations of the Fiat Ducato.
Full 12-month warranty, EU-wide delivery within 5 working days and a price by VIN and engine code within 1 hour.

Fiat Ducato

The best-selling commercial van in Europe

The Fiat Ducato sits at the top of the Sevel platform, shared with the Citroën Jumper and the Peugeot Boxer. Since 2002 it has most often run on two robust Sofim engines - the 2.3 Multijet (F1A) as the primary choice and the 3.0 Multijet (F1C) in the heavier Maxi versions. Following the Stellantis merger, the 2.2 HDi / BlueHDi (DW12) from the PSA-Ford joint development was added.

We supply brand-new engines direct from the original manufacturer - not reman, not „as-new“. Every unit comes with full service documentation, compatibility verified by VIN, and we deliver it across the EU within 5 working days.

Get a price for my Ducato
Fiat Ducato - van with new F1A / F1C / DW12 engine
Engines by generation

Which Fiat Ducato engines we supply

We cover all common engine codes for the Fiat Ducato III and the Stellantis-era Ducato (2006 - present) - the dominant 2.3-litre F1A, the 3.0-litre F1C for heavy Maxi variants and the newer 2.2-litre DW12 BlueHDi.

F1A

Fiat Ducato 2.3 Multijet / JTD

Displacement
2 287 cm³
Power
88 - 129 kW (120 - 175 hp)
Years built
2002 - present
Variants
Euro 3 - Euro 6d
Engine codes by generation
  • Euro 3 / 4 F1AE0481, F1AE0481A, F1AE0481B, F1AE0481C, F1AE0481D, F1AE0481E, F1AE0481G, F1AE0481H, F1AE0481N
  • Euro 4 / 5 F1AE3481, F1AE3481B, F1AE3481C, F1AE3481D, F1AE3481E
  • Euro 5 / 6 F1AFL411, F1AFL411A, F1AFL411B, F1AFL411C
  • Euro 6 / 6d F1AGL411B, F1AGL411C, F1AGL411D, F1AGL4112, F1AGL4113

The dominant engine in the Ducato line-up - a Sofim common rail with full electronic management. Used in the lighter and medium-duty variants (28, 30, 33, 35) and, thanks to the very high build numbers, peripheral parts are widely available.

Price for the 2.3 Multijet engine
F1C

Fiat Ducato 3.0 Multijet

Displacement
2 998 cm³
Power
116 - 130 kW (157 - 177 hp)
Years built
2006 - present
Variants
Euro 4 - Euro 6
Engine codes by generation
  • Euro 4 F1CE0481, F1CE0481A, F1CE0481B, F1CE0481D
  • Euro 5 F1CE0481H, F1CE0481HA
  • Euro 5 / 6 F1CE3481, F1CE3481D, F1CE3481E, F1CE3481K, F1CE3481N
  • CNG / spec. F1CE0441A

The Sofim 3.0-litre engine for the Fiat Ducato Maxi and heavy versions (35 Maxi, 40 Heavy). Higher torque for towing trailers or carrying the full payload day in day out. Shared with the Iveco Daily.

Price for the 3.0 Multijet engine
DW12

Fiat Ducato 2.2 HDi / BlueHDi

Displacement
2 198 cm³
Power
88 - 132 kW (120 - 180 hp)
Years built
2021 - present
Variants
Euro 5 - Euro 6d
Engine codes by generation
  • Euro 4 / 5 4HV, 4HU, 4HY, DW12TED4
  • Euro 5 / 6 4H03, AH03
  • Ford / PSA P22DTE, PUMA

A jointly developed PSA-Ford engine (Puma) which arrived in the Ducato after the Stellantis merger. Chain timing drive, long service intervals and an alternative to the traditional Sofim 2.3 - especially for owners who prefer the PSA platform.

Price for the 2.2 HDi engine
8140 / older

Older Ducato generations (1994 - 2006)

For owners of older models we also supply the classic Sofim 8140 engines from the Ducato I and II, the predecessor of the Multijet range. Alongside those we have the 2.0 HDi (DW10), classic XUD9 and petrol variants. If you are not sure which variant you have, just send us the VIN.

  • 2.8 JTD / HPI 8140.43, 8140.43N, 8140.43S, 8140.43X
  • 2.5 / 2.7 TD 8140.21, 8140.27, 8140.47, 8140.63, 8140.63S, 8140.67
  • 2.0 HDi (DW10) RHV, DW10FU, DW10TD
  • 2.0 / 2.3 petrol 250A1000, 250A2000, XU10J2
Price for an older engine

Could not find your engine code here, or unsure which engine your vehicle has?

Send us the VIN - we will read out the exact engine code, generation and all technical parameters. You will have the price and availability in your inbox within a few hours.

Get a price by VIN
Parts

Parts for the Fiat Ducato

In addition to whole engines we supply all key components - so you avoid sourcing parts from five different suppliers and losing days waiting for „the last one“.

Turbo F1A / F1C / DW12

Garrett, BorgWarner and Mitsubishi turbos with electronic actuator (VNT) for all three engine ranges. Supplied with gasket and hoses.

Bosch / Delphi injectors

Common-rail injectors for the 2.3 and 3.0 Multijet (Bosch CRI) and the 2.2 HDi (Delphi). Including coding data for IMA programming.

High-pressure pump

Bosch CP1, CP3 and CP4 for Sofim engines, Delphi DFP3 / DFP6 for the 2.2 HDi. Picked precisely by VIN to avoid rail mismatch.

Timing

The Sofim F1A and F1C use chain timing, as does the DW12. Kits for all variants including water pump, pulleys and tensioners.

Cylinder head

Fully assembled 2.3, 3.0 and 2.2 heads including valves, guides and gaskets. A solution for engine overheating or a cracked original head.

Clutch and flywheel

Three-piece clutch kits and dual-mass flywheels for the entire Ducato range, including the Maxi versions with the 3.0 engine.

Choose the scope, we cover the rest

Three options for three scenarios - from a complete swap to an economical solution for workshops with their own parts.

Detailed comparison of engine types
New short block No accessories

New short block

Lower upfront price and the option to fit your existing accessories.

  • Engine block
  • Crankshaft
  • Crankshaft bearings
  • Connecting rod set
  • Pistons
from 2 290 €
Get a price
Most popular
New long block Best price-to-value ratio

New long block

The most frequently bought option. The engine core including the cylinder head.

  • Everything from the short block
  • Cylinder head, head gasket
  • Valves, valve cover
  • Camshafts
  • Oil sump
from 3 990 €
Get a price
New complete engine Ready to install

New complete engine

A fully dressed engine. Built on the long block and includes all accessories.

  • Everything from the long block
  • Wiring loom and sensors
  • Injection system, intake, turbo
  • Alternator, starter, A/C compressor
  • Timing, exhaust, pumps, flywheel
from 8 100 €
Get a price
Why new

A reman for the Ducato usually does not pay off

The Fiat Ducato is the best-selling commercial van in Europe - which is why the reman engine market is huge, but quality varies wildly. Without a guaranteed history and component quality, a reman often ends up back at the workshop before it has paid for itself.

A new engine has a clear 0 km, full warranty and no doubts about its history. With a Ducato that comfortably exceeds 30,000 km a year, the investment pays back faster than you would think.

Reman vs. new - full comparison

  • 12-month warranty

    Full manufacturer warranty - no exceptions, no curtailment for normal wear and tear.

  • Delivery within 5 days

    Standard for 2.3 Multijet, 3.0 Multijet and 2.2 HDi. Special codes within 7 - 10 days.

  • Free VIN check

    Before ordering we verify the exact engine code so it fits your Ducato.

Quote

We send the price within 1 hour

Enter the VIN and engine code. The rest is on us - we verify the match, calculate the price and reply with a specific quote.

  • No commitment, no registration
  • Reply within 1 hour during business hours
  • Free VIN check
Phone+421 948 504 044
Emailinfo@torkemotor.eu

Your details

So we can reach you with the quote.

Your vehicle

The more accurate the data, the more accurate the price.

With the engine code filled in correctly, we send the quote within 1 hour.
You will find it in the registration document as the "Engine identification number" - e.g. F1AGL4113.

Engine type

If you are not sure, we will send the quote for all three.

I am also interested in parts

Tick the parts you are interested in. We will send the prices together with the engine quote.

Upload registration document (optional)
Drag files here or click to choose
Allowed: PDF, PNG, JPG · max 10 MB total

By submitting the form you agree to the processing of personal data for the purpose of issuing a quote in accordance with the GDPR.